Kyocera KM-1815 - TCP;IP Setting

Printer Settings
3-5
4
Press the S key or the T key to select AppleTalk
Set and press the Enter key. The AppleTalk Set
screen is displayed.
5
If you want to use AppleTalk, select On and press the
Enter key. The message display shows Completed
and returns to the Network Setting screen.
TCP/IP Setting
Turn this setting On when this machine is connected to a Windows network, etc., using TCP/IP.
1
Refer to steps 1 through 3 of AppleTalk Setting to access the Network Setting screen.
Note If you are performing this setting immediately after having made the AppleTalk setting, the Network
Setting screen will already be displayed.
2
Press the S key or the T key to select TCP/IP
Setting and press the Enter key. The TCP/IP
Setting screen is displayed.
3
Press the S key or the T key to select TCP/IP and
press the Enter key. The TCP/IP screen is displayed.
Network Setting:
Back
AppleTalk Set.
TCP/IP Setting
Exit
*
AppleTalk Set.:
On
Off*
Cancel
*
Network Setting:
Back
AppleTalk Set.
TCP/IP Setting
Exit
*
TCP/IP Setting:
Back
TCP/IP
DHCP
Exit