Kyocera KM-1815 - Canceling Jobs

Operation Status
4-9
Canceling Jobs
Perform the following procedure to cancel both print jobs and scan jobs that have not yet been
processed.
Note The following procedure will explain specifically how to cancel print jobs. The procedure is the same
for canceling scan jobs. To cancel scan jobs, select Send Job Status instead of Print Job
Status.
1
Press the Status/Job Cancel key. The Status Menu screen is displayed.
2
Press the S key or the T key to select Print Job
Status and press the Enter key. The Print Job
Status screen, which shows a list of jobs being
processed, will be displayed.
Example If all jobs have already been processed, no jobs will be
shown in the list. Press the right select key.
3
Press the S key or the T key to select the job that you
want to cancel and press the left select key. Are you
sure? is displayed.
4
To cancel that job, press the left select key.
5
Canceling appears in the message display and the
process to cancel the job will begin.
*
Status Menu:
Print Job Log
Print Job Status
Send Job Status
Pause
Print Job Status:
MenuCancel
*
Cancel
0008
Print Job Status:
0009
Menu
0010
Doc-1
Copy-B
Copy-A
Canceling.