Operation Status
4-11
Verifying Scanner Status
Perform the following procedure to verify the current status of scanning operations on this machine.
1
Press the Status/Job Cancel key. The Status Menu screen is displayed.
2
Press the S key or the T key to select Scanner and
press the Enter key. The Scanner status screen is
displayed. Check the status of scanning operations.
The machine is ready to scan.
The machine is currently scanning.
The machine is preparing to scan.
3
Once you have finished verifying the status of scanning operations, press the Enter key. The
message display returns to the Status Menu screen.
*
Status Menu:
Print Job Log
Scanner
Send Job Log
Pause
Scanner:
Ready.
Scanner:
Scanning.
Scanner:
Please wait.
To Next Page
Loading...
