System Settings
5-4
Default Operation Mode
Perform the following procedure to set whether the display that appears after power is turned on to
the machine will be the one for the copy operation mode, for the scanner operation mode or for the
status operation mode.
1
Press the System Menu/Counter key. The Sys. Menu/Count screen is displayed.
2
Press the S key or the T key to select Common
Setting and press the Enter key. The Common
Setting screen is displayed.
3
Press the S key or the T key to select Default
Orerat and press the Enter key. The Default
Operat screen is displayed.
4
Press the S key or the T key to select the desired
default operation mode and press the Enter key. The
message display shows Completed and returns to the
Common Setting screen.
Sys. Menu/Count.:
Date/Timer Set.
Adjust
Common Setting
Exit
Common Setting:
Default Operat.
Language
Back
Exit
Default Operat.:
E-mail
Copy
*
Cancel
Status
To Next Page
Loading...
