System Settings
5-5
Unit of Measurement
Perform the following procedure to change the unit of measurement that will be used in the custom
original size and custom paper size settings.
1
Press the System Menu/Counter key. The Sys. Menu/Count screen is displayed.
2
Press the S key or the T key to select Common
Setting and press the Enter key. The Common
Setting screen is displayed.
3
Press the S key or the T key to select Measurement
and press the Enter key. The Measurement screen is
displayed.
4
Press the S key or the T key to select either Inch or
mm and press the Enter key. The message display
shows Completed and returns to the Common
Setting screen.
Sys. Menu/Count.:
Date/Timer Set.
Adjust
Common Setting
Exit
One Touch Keys
Common Setting:
Toner Setting
Measurement
Exit
Measurement:
*
Cancel
Inch
mm
To Next Page
Loading...
