2JB/2JC
1-3-69
U985
Displaying the developing unit history
Description
Displays the past record of machine number and the developing counter.
Purpose
To check the count value machine number and the developing counter.
Method
Press the start key. Past record of 5 cases is displayed.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
U990
Checking/clearing the time for the exposure lamp to light
Description
Displays, clears or changes the accumulated time for the exposure lamp to light.
Purpose
To check duration of use of the exposure lamp. Also to clear the accumulated time for the lamp after replace-
ment.
Method
1. Press the start key.
The accumulated time of illumination for the exposure lamp is displayed in minutes.
2. Press the start key. The accumulated time is cleared.
Setting
1. Enter a accumulated time using the cursor up/down keys.
2. Press the start key. The time is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
U991
Checking the scanner count
Description
Displays the scanner operation count.
Purpose
To check the status of use of the scanner.
Method
Press the start key.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description
MACHINE No. HISTORY 1 to 5 Past record of machine number
COUNT HISTORY 1 to 5 Past record of developing counter
Display Description
COPY SCAN COUNT Scanner operation count for copying
FAX SCAN COUNT Scanner operation count for fax
To Next Page
Loading...
