2JB/2JC-1
1-1-2
Charge erasing system................... Exposure by cleaning lamp
Fusing system.................................Heat roller
Heat source: halogen heaters
Abnormally high temperature protection devices: thermostats
Image storage memory...................64 MB (standard)
Resolution.......................................600 x 600 dpi
Operating environment ...................Temperature: 10 to 32.5
°C/50 to 90.5°F
Humidity: 15 to 80% RH
Altitude: 2500 m/8,202 ft maximum
Brightness: 1500 lux maximum
Dimensions .....................................570 (W) x 640 (D) x 767.2 (H) mm (main unit only)
22
7/16" (W) x 25 3/16" (D) x 30 3/16" (H)
Weight.............................................75 kg/165 lbs
Floor requirements..........................725 (W) x 640 (D) mm (using MP tray)
28
9/16" (W) x 25 3/16" (D)
Power source..................................120 V AC, 60 Hz, 11.2 A
220 to 240 V AC, 50 Hz, 6.0 A
Power consumption ........................1360 W
Options ...........................................Document processor, paper feeder, document finisher, built-in finisher,
job separator, key counter, printer kit and FAX kit
NOTE: These specifications are subject to change without notice.
To Next Page
Loading...
