Kyocera KM-2540 - Pwbs; Detaching and Refitting the Engine PWB

2JB/2JC-1
1-5-55
1-5-8 PWBs
(1) Detaching and refitting the engine PWB
Follow the procedure below to replace the engine PWB.
Procedure
1. Remove twelve screws and remove the rear
cover.
Figure 1-5-100
2. Remove three screws.
3. Remove the claw.
4. Remove the connector.
5. Remove the high voltage PWB.
Figure 1-5-101
Screws
(twelve)
Rear cover
Screw
Screw
Claw
Screw
High
voltage PWB
Connector