Kyocera KM-2540 - Other Electrical Components

2JB/2JC
2-2-7
(5) Other electrical components
Figure 2-2-5 Other electrical components
1. Exposure lamp (EL) ..................................... Exposes originals.
2. Cleaning lamp (CL) ...................................... Removes residual charge from the drum surface.
3. Fuser heater M (FH-M) ................................ Heats the heat roller.
4. Fuser heater S (FH-S) ................................. Heats the heat roller.
5. Drum heater (DH) ........................................ Dehumidifies the image formation section.
6. Cassette heater (CH) ................................... Dehumidifies the cassette section.
Machine front
Machine inside
Machine rear
4
3
1
2
5
6