Kyocera KM-2540 - Install the Waste Toner Box; Install the Optional Original Cover or the DP; Install Other Optional Devices

2JB/2JC
1-2-9
5. Gently push the toner container into the
machine along the rails.
Push the container all the way into the
machine until it locks in place.
Figure 1-2-13
1. Install the waste toner box in the machine.
2. Close the front cover.
Figure 1-2-14
1. Install the optional original cover or DP.
1. Install the optional devices (job separator,
built-in finisher, document finisher, printer kit
and/or fax kit etc.) as necessary.
Toner container
Install the waste toner box.
Waste toner box
Install the optional original cover or the DP.
Install other optional devices.