2JB/2JC-1
1-2-11
1. Install the guide case to the machine right.
Figure 1-2-14-1
(2) Setting initial copy modes
Factory settings are as follows:
Maintenance
item No.
Contents Factory setting
U253 Switching between double and single counts Double count (A3/LGR)
U254 Turning auto start function ON/OFF ON
U260 Selecting the timing for copy counting After ejection
U277 Setting auto application change time 30 s
U285 Setting service status page ON
U324 Setting the main charger cleaning indication ON
U326 Setting the black line cleaning indication ON
U342 Setting the ejection restriction ON
U343 Switching between duplex/simplex copy mode OFF
Installing the guide case.
Guide case
Completion of the machine installation.
To Next Page
Loading...
