Kyocera KM-2540 - Checking Toner Motor Operation

2JB/2JC
1-3-37
U135
Checking toner motor operation
Description
Turns the toner feed motor and toner feed clutch on.
Purpose
To check the operation of the toner feed motor or toner feed clutch. Settings may also be modified where
mobility in toner is inferior or when printing materials of very high density. Normally no change is necessary
from the initial setting.
Method
1. Press the start key.
2. Select the item.
Method
1. Select the item.
2. Press the start key. The operation starts.
3. To stop operation, press the stop/clear key.
Setting
1. Select the item to be set.
2. Change the setting using the cursor up/down keys.
Increase the setting value of [CARRY ON TIME] where mobility in toner is inferior.
Increase the setting value of [SUPPLY ON TIME] when printing materials of very high density.
3. Press the start key. The value is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description
TONER The toner feed motor (TFM) or the toner feed clutch (TNFCL) is
turned on.
TIMER On-Off time setting
Display Description
TONER CARRY Toner feed motor (TFM)
TONER SUPPLY Toner feed clutch (TNFCL)
Display Description Setting
range
Initial
setting
CARRY ON TIME Toner feed motor drive on time 0 to 255 100
SUPPLY ON TIME Toner feed clutch on time 0 to 255 30
SUPPLY OFF TIME Toner feed clutch off time 0 to 255 100