2JB/2JC
1-3-63
U906
Resetting partial operation control
Description
Resets the service call code for partial operation control.
Purpose
To be reset after partial operation is performed due to problems in the casettes or other sections, and the
related parts are serviced.
Method
1. Press the start key.
2. Press [EXECUTE] on the touch panel.
3. Press the start key to reset partial operation control.
4. Turn the main power switch off and on.
U908
Checking the total counter value
Description
Displays the total counter value.
Purpose
To check the total counter value.
Method
Press the start key. The screen for total count value is displayed.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
U910
Clearing the black ratio data
Description
Clears the accumulated black ratio data for A4 sheet.
Purpose
To clear data as required at times such as during maintenance service.
Method
1. Press the start key.
2. Press [EXCUTE] on the touch panel.
3. Press the start key. The accumulated black ratio data is cleared.
When clearing is complete, the machine automatically returns to the same status as when the main
power switch is turned on.
U911
Checking/clearing copy counts by paper sizes
Description
Displays and clears the paper feed counts by paper sizes.
Purpose
To check or clear the counts after replacing consumable parts.
Method
Press the start key. The screen for the paper feed counts by paper size is displayed.
Clearing
1. Select the paper size.
To clear all counts, press the reset key.
2. Press the start key. The count is cleared.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
To Next Page
Loading...
