Fax Operation (Advanced) 3-45
5 If you want to completely delete the F-Code Relay Box, press the
[Delete] key and go to the next step. If you want to modify the
information for that F-Code Relay Box, press the [Change contents]
key and go to step 7.
> Deleting an F-Code Relay Box
6 Press the [Yes] key. The message display will return to the same
screen as was displayed in step 2. If you are finished deleting F-
Code Relay Boxes, press the Reset key.
> Modifying information
7 If you want to change the final destination fax numbers, press the
[] key and go to the next step. If you want to modify any other
basic information, press the key that corresponds to that information
and refer to Registering New F-Code Relay Boxes on page 3-42.
> Deleting destinations
8 Press the destination that you want to delete until it is highlighted.
Multiple selections are available. If the destination you want to delete
is not displayed, use the [T] and/or [S] cursor keys to switch to the
screen that displays the destination that you want.
9 To delete the selected destination(s), press the [Delete] key and then
the [Yes] key.
Adding destinations
10Press the [Add] key.
11Enter the additional fax number(s).
12Once you are finished entering all of the fax numbers that you want,
press the [Finish dest. Set] ([Dest. set]) key.
Contents change/del.
Change
contents
Ba
Register box
Subaddress relay box
Delete
01.
3333.
3333.
Subaddress
Password
0002.
Add/change/del des. Ba
Register box
Subaddress relay box
*0002.
12345678.
1/1.
01.
CloseBack
Change
Add
Delete
Memory usage:
JUN-06-2007 16:00
1/1.
.0%
.
FREE
Subaddress relay box
Enter Destination.
Register box
book
Address
Abbrev.
Delete
SpacePause
01.
ABC
ABCDest
destinat.
Next
1
Note You can enter the fax number(s) using the numeric
keys, one-touch keys and the address book. Chain dial keys
can be used as well.
If you want to enter multiple fax numbers with the numeric
keys, press the [Next destinat.] ([Next dest.]) key after each
fax number.
To Next Page
Loading...
