Kyocera KM-2540 - Dialing with a Group Dial Key

Fax Operation (Advanced) 3-55
10Enter the additional fax number(s).
11Once you are finished entering all of the fax numbers that you want,
press the [Finish dest. Set] ([Dest. set]) key.
Changing destinations
12Select one destination to be changed, and then press the [Change]
key.
13Enter the new fax number.
You can enter the fax number using the numeric keys, one-touch
keys and the address book. Chain dial keys can be used as well.
14Press the [Finish dest. Set] ([Dest. set]) key.
15Press the [Close] key.
Once you are finished making all of the modification that you want,
go directly to step 18.
16Enter the abbreviated number of an unregistered speed-dial key
(0001 - 1000).
Once a 4-digit number is entered, that number may be changed
using the [+] and [-] keys.
17Press the [Close] key.
18Once you are finished modifying all of the items that you want, press
the [OK] key.
The message display will return to the same screen as was
displayed in step 3.
If you want to continue modifying other group dial keys, repeat steps
3 through 18. If you are finished deleting group dial keys, press the
Reset key.
Dialing With a Group Dial Key
1
If the operation involves the transmission of documents, set the
documents you want to transmit.
2 If you want to change the transmission conditions, such as the
resolution and density, press the [TX setting] key. If you do NOT
want to change the current conditions, go directly to step 5.
3 Press the key that corresponds to the desired item and change the
information as desired. (To change each transmission condition,
refer to page 2-5 and page 2-6.)
FREE
Group dial
Enter Destination.
Register the dial.
book
Address
Abbrev.
Delete
SpacePause
0123456_.
CDEABC
0004.
destinat.
Next
1Dest
Note You can enter the fax number(s) using the numeric
keys, one-touch keys and the address book. Chain dial keys
can be used as well.
If you want to enter multiple fax numbers with the numeric
keys, press the [Next destinat.] ([Next dest.]) key after each
fax number.
CloseBack
Change
Add
Delete
Memory usage:
JUN-06-2007 16:00
1/1.
3
456.
03.
.0%
( 4 digits)
Enter using # key.
Abbreviation Ba
Register the dial.
Group dial
0004.
0004.
Note You CANNOT use group dial keys in combination with chain
dial keys.
You can use group dial keys not only for standard transmission,
but also for such operations as Broadcast Transmission and
Polling Reception.