Kyocera KM-2540 - Setting the Number of Rings [Auto Fax Reception] (Number of Rings Setting)

6-12 Various Settings and Registration
Setting the Number of Rings [Auto Fax
Reception] (Number of Rings setting)
The number of times the fax will [ring] before an incoming call is
answered in the Auto Fax Reception mode, the Auto FAX/TEL Switching
mode [this setting is not available in metric models] or the TAD
Reception mode can be set here to any number between 1 and 15.
1 Press the System Menu/Counter key. The System Menu / Counter
screen will appear.
2 Press the [Fax Default] key.
3 Press the [T] key until # of Rings is highlighted.
4 Press the [Change #] key.
5 Use the [+] or [-] key to select the number of rings before an
incoming call is answered in each mode: the Auto Fax Reception
mode, the Auto FAX/TEL Switching mode (this setting is not
available in metric models) and the TAD Reception mode.
6 Press the [Close] key. If you are finished making settings, press the
Reset key to return to the initial mode.
Note If you want to cancel the procedure part way through, press
the Reset key. The touch panel will return to the initial mode
settings.
System Menu
Default
Copy
Default
FAX
Language
Setting
MP Tray
Orig. Size
Register
Default
Machine
Accou
n
Job
Repor
t
Print
System Menu / Counter
# of Rings Ba
02.
For fax RX
(01-15)
Auto Fax/Tel SW
(00-15)
For answering t
e
(01-15)
00. 15
.
System Menu / Counter