Various Settings and Registration 6-31
2 Press the key which displays the Permit ID you want to modify or
delete.
3 If you want to delete the registered Permit ID, press the [Delete] key
and then go to the next step. If you want to modify the registered
information, press the [Change contents] key and then go directly to
step 5.
> Deleting a Permit ID
4 Press the [Yes] key.
The message display will return to the same screen as was
displayed in step 2. If you are finished deleting Permit IDs, press the
Reset key.
> Modifying information
5 Press the Stop/Clear key to delete the old number and then enter
the new Permit ID, or use the [] and/or [] keys to move the cursor
to a desired location and reenter the number as desired.
6 Press the [Confirm] key. The message display will return to the same
screen as was displayed in step 2. Once you are finished modifying
and/or deleting Permit IDs, press the Reset key.
Registering New Reject Fax Numbers
1 Press the [Register] key. The Register screen will appear.
Permit List
Register in TX/RX Restriction list.
0101.#01
#02
#03
#04
#050202. 5555.
Contents change/del.
Change
contents
Ba
Register in TX/RX Restriction list.
Permit ID No.
Delete
1.
0101.
( 4 digits)
Enter using # key.
Detail contents Ba
Register in TX/RX Restriction list.
Permit ID No.
0101.
1.
Note You can register up to 5 numbers as Reject Fax Numbers in
this fax.
If you want to cancel the procedure part way through, press the
Reset key. The touch panel will return to the initial mode settings.
Place the original & assign destination.
Dest
Ready for fax transmission.
Basic Application
Abbrev.
TXAddress
Register
settingbook
Print Report
To Next Page
Loading...
