Kyocera KM-2560 - Page 221

System Menu
ADVANCED OPERATION GUIDE 6-51
6
Duplex
Select binding orientation for duplex mode. The table below shows the
available settings.
Use the procedure below to select the interface.
1
Press the System Menu key.
2
Press [Printer] and [Change] of Duplex.
3
Press [1-sided],
[2-sided Bind
LongEdge], or
[2-sided Bind
ShortEdge].
4
Press [OK].
Copies
Set the default number of copies, from 1 to 999.
Use the procedure below to select the interface.
1
Press the System Menu key.
2
Press [Printer] and [Change] of Copies.
Item Description Finish
1-sided No duplex mode
2-sided Bind
ShortEdge
Shorter edge
bound
2-sided Bind
LongEdge
Longer edge
bound
Printer - Duplex
Cancel OK
Status 10/10/2007 10:10
Set the default duplex mode .
2-sided
Bind LongEdge
1-sided
2-sided
Bind ShortEdge