Kyocera KM-3050 - Page 89

FAX Operation (Advanced)
OPERATION GUIDE 4-23
4
NOTE: To edit a registered destination, select the destination to be edited
from the list, press [Detail/Edit] and edit the information.
To remove a registered destination, select the destination to be removed
from the list and press [Delete].
14
Press [OK].
15
Set details for forwarding settings. You can change the following settings.
• File format setting
• File separation setting
NOTE: For details on forwarding settings, refer to Forwarding Detail
Settings on page 4-25.
16
Press [OK].
17
Press [Change] of Storing in FAX Box.
18
Press [On] or [Off].
To store the originals in the FAX Box, press [On]. If you do not want to store
the originals in the FAX Box, select [Off], press [OK] and proceed to step
20.
NOTE: To set the FAX Box as the Forward Destination, register the FAX
Box in advance. For details, refer to FAX Box Function on page 4-43.
19
Select the FAX Box to be used to store the originals and press [OK].
20
Set details for forwarding settings. You can change the following settings.
• Print setting
• Enable time setting
• File name registration
NOTE: For details on forwarding settings, refer to Forwarding Detail
Settings on page 4-25.
21
Press [Register]. The forwarding settings is registered.
22
To register another forwarding settings, repeat steps 4 to 21.
23
Press [Others].
24
Press [Change] of Others.