FAX Operation (Advanced)
4-36 OPERATION GUIDE
Advanced Non-Conformity with Requirements List
FAX/i-FAX > Common > RX/Forward Requirements > Requirement
List > Advanced
Specify the advanced non-conformity with requirements list settings.
The settings available on the Advanced Non-Conformity with
Requirements List page are shown below.
Item Description
Name Displays Use Requirement List - Not complying with the requirements.
Status Specifies whether the forwarding settings not conforming to the requirements
list are enabled.
Activating Time Specifies whether a time is specified.
Enable Time Registers times when the specified requirements are enabled or disabled. You
can register any time between 00:00 and 23:59.
File Name Sets the name of the file created when a fax is forwarded.
Additional Information Appends information such as the date/time, job number and destination
address to the file name.
To Next Page
Loading...
