45
5.2.5.1 User Default Settings
User Default Settings enables to customize the default states for several items, which will
be applied in the boot sequence or by pressing the Reset Key.
Press the L1 Key to enter User Default Settings screen.
Press the L1 Key repeatedly to choose either of the items for Cut Mode in Copy Mode.
Press the L2 Key repeatedly to select a proper setting for Image Type in Copy/Scan Mode.
Press the L3 Key repeatedly to choose either of the items for Density/Contrast/Sharpness
in Copy/Scan Mode.
Press the L4 Key repeatedly to choose either of the items for Background in Copy/Scan
Mode.
Press the R1 Key repeatedly to select a desired format for STF Format in Scan Mode.
Press the R2 Key repeatedly to select a desired resolution for STF DPI in Scan Mode.
Press the Enter Key to apply the setting.
To Next Page
Loading...
