6
4. Select ane destination folder with the concerning
key, and then press the Enter Key.
Select any destination folder
5. Press the Scan Key again to indicate the Scan Mode Screen.
6. Change the position of Original Guides according to the original size.
Insert the original under the Scanner Unit with facing up its reading side.
The machine automatically carries it to scan the image. (No need to press any key)
7. The original is ejected from the rear side after the
scan.
(It is guides to the front side.)
Original Guides
Destination
*** ***
Scan Folder 1
Scan Folder 2
Scan Folder 3
Scan Folder 4
Scan Folder 5
Scan Folder 6
FTP1
FTP2
To Next Page
Loading...
