Preparation for Usage
2-39
8
Press [+] and [–] to set the time and
date.
NOTE: Set the date and time after setting the time difference.
Daylight savings time is disabled if daylight savings time and time/date are changed at the same
time.
9
Press [Close]. Settings are saved.
Installing the Scanner Utilities
The CD-ROM contains the following utilities for this scanner system.
• Scanner File Utility
• Address Book for Scanner
• Address Editor (Administrator Tool)
• DB Assistant (Administrator Tool)
•TWAIN Source
The following procedures are based on a Windows XP installation, but the same procedure may be
followed to install on other Windows operating systems.
1
Start up Windows.
Close any other running applications.
2
Insert the included Software Library CD-ROM into the
CD-ROM drive.
A usage agreement is displayed. Click the Accept
button to accept the agreement terms. The Main Menu
screen is displayed.
If the screen is not displayed even after loading the
CD-ROM, open the CD-ROM drive letter and
double-click on the setup.exe file shown in the
window.
3
Click on Scanner Utilities.
Date/Time
Year
System Menu
Back
Machine Default-
To Next Page
Loading...
