3-2-7
2A3/4
Mode
setting
Image
processing
Others
U254 Turning auto start function on/off
U255 Setting auto clear time
U256 Turning auto preheat/energy saver function on/off
U258 Switching copy operation at toner empty detection
U260 Changing the copy count timing
U263 Setting DF copy ejection orientation
U264 Setting date display order
U265 Setting OEM purchaser code
U330 Sets the number of copies for switching the copy
eject tray in the finisher
U333 Setting the number of digits of ID-code
U334 Setting the ejection method in the saddle finisher
U343 Switching between duplex/simplex copy mode
U344 Setting preheat/energy saver mode
U345 Setting the value for maintenance due indication
U347 Setting auto drawer size detection
U348 Setting the copy density adjustment range
U350 Setting the ID-code error output
U402 Adjusting margins in image printing
U403 Adjusting margins for reading an original on the
contact glass
U404 Adjusting margins for DF original reading
U901 Checking/clearing copy counts by paper feed
locations
U904 Checking/clearing the service call counts
U905 Checking/clearing counts by optional devices
U906 Resetting partial operation control
U907 Checking and resetting the count value on each
ejection location
U908 Checking the count value of the electronic counter
U990 Checking/clearing the time for the exposure lamp to
light
U992 Checking/clearing the printer count
Section
Item
Maintenance item contents
Initial
No. setting*
* Initial setting for executing maintenance item U020
ON
120
ON
SINGLE
MODE, 0
EJECT
FACE-DOWN
—
—
100
4 digits
2 BIN
OFF
Energy Star
applied
0
ON
NORMAL
ON
—
—
—
—
—
—
—
—
—
—
—
To Next Page
Loading...
