3-2-15
2A3/4
Maintenance
item No.
Description
U022 Initializing backup data
Description
Initializes only the data set for the optical section.
Purpose
To be executed after replacing the scanner unit.
Method
1 Press the print key. The screen for executing is displayed.
2 Press SCANNER on the touch panel. EXECUTE is displayed.
3 Press EXECUTE on the touch panel. It is displayed in reverse.
4 Press the print key. The data for the optical section (U060 to 099,
U403, U404 and U990) is initialized.
Completion
To exit the maintenance mode, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.
To Next Page
Loading...
