3-2-71
2A3/4
Maintenance
item No.
Description
U250 Setting the maintenance cycle
Description
Displays and changes the maintenance cycle.
Purpose
To check and change the maintenance cycle.
Method
Press the print key. The current setting is displayed as follows:
Maintenance cycle (number of copies) = setting × 1000
Setting
1 Change the setting using the Up/Down keys.
For example, when set to 120, the maintenance cycle is set to 120000.
Pressing the Up key when set to 600 rolls over the setting to 0.
2 Press the start key. The value is set , and the screen for selecting a
maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press
the stop/clear key. The screen for selecting an item is displayed.
U251 Checking/clearing the maintenance count
Description
Displays, clears and changes the maintenance count.
Purpose
To check the maintenance count. Also to clear the count during
maintenance service.
Method
Press the print key. The maintenance count is displayed.
Clearing
1 Press CLEAR on the touch panel.
2 Press the print key. The count is set, and the screen for selecting a
maintenance item is displayed.
Setting
1 Enter a six-digit count using the numeric key.
2 Press the print key. The count is set , and the screen for selecting a
maintenance item is displayed.
Completion
To exit this maintenance item without changing the count, press the stop/
clear key. The screen for entering a maintenance item No. is displayed.
Description
Maintenance
cycle
Setting range
0 to 600
Initial setting
150
Change in value per step
1000 (copies)
2AD-1
To Next Page
Loading...
