3-2-88
2A3/4
Description
Maintenance
item No.
U348 Setting the copy density adjustment range
Description
Selects the adjustment range for copy density from NORMAL and
SPECIAL AREA (for wider range).
Purpose
To change the setting according to user request.
When especially dark or light density is requested, set to SPECIAL AREA.
Method
Press the print key. The screen for selecting an item is displayed.
Setting
1 Select the density range.
Initial setting: SPECIAL AREA
2 Press the print key. The setting is set, and the screen for entering a
maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press
the stop/clear key. The screen for selecting a maintenance item is
displayed.
Display
SPECIAL AREA
NORMAL
Description
25 steps (enlargement mode)
13 steps
To Next Page
Loading...
