2FD/2FF/2FG
1-6-8
12. Remove the stop ring of the bypass paper
feed shaft and slide the bushing in the
direction of the arrow.
Figure 1-6-16
13. Slide the bypass forwarding pulley shaft
temporarily toward the rear side and then
raise it to remove from the bypass unit.
* Remove the shaft while raising the actuator
of the bypass paper switch.
Figure 1-6-17
14. Remove the bushing an cam on the rear of
the bypass forwarding pulley shaft.
Figure 1-6-18
Bypass paper feed shaft
Bushing
Stop ring
Bypass forwarding pulley shaft
Acutuator
To Next Page
Loading...
