Kyocera KM-5035 - Page 308

2FD/2FF/2FG
2-3-4
Connector Pin No. Signal I/O Voltage Description
YC5
Connected
to the fixing
heater M
and S.
YC6
Connected
to the
scanner
drive PCB,
DP* and
hard disk*.
CN8
Connected
to the main
PCB.
1 FH-M ON O 120/0 V AC FH-M ON/OFF
1 FH-M ON O 220-240/0 V AC FH-M ON/OFF
2 FH-S ON O 120/0 V AC FH-S ON/OFF
2 FH-S ON O 220-240/0 V AC FH-S ON/OFF
3 FH LIVE O 120 V AC 120 V AC supply
3 FH LIVE O 220-240 V AC 220-240 V AC supply
1 GND - - Ground
2 24V O 24 V DC 24 V DC supply for SDPCB
3 GND - - Ground
4 5V O DC5V 5 V DC supply for SDPCB
5 F2 24V O 24 V DC 24 V DC supply for DP*
6 F2 24V O 24 V DC 24 V DC supply for DP*
7 GND - - Ground
8 GND - - Ground
9 F3 5V O DC5V 5 V DC supply for DP*
10 F3 5V O DC5V 5 V DC supply for DP*
11 GND - - Ground
12 GND - - Ground
13 GND - - Ground
14 GND - - Ground
15 24V O 24 V DC 24 V DC supply for hard disk*
16 5V O DC5V 5 V DC supply for hard disk*
1 CFM4 I 0/5 V DC CFM4 remote signal
3 POWDOWN I 0/5 V DC SLEEP singal
*: Optional