Page 5-13
5-3 Registering Dialing Information
4. Select Chain Dial and then click on the OK button. The Chain Dial Registration dialogue box will appear.
5. Register the chain dial information. Enter the following registration information.
1 Dial No. field: Enter the corresponding chain dial number. (between 001 and 600)
2 Chain Name field: Enter a name for that chain dial number. (up to 20 characters)
3 Chain No. field: Enter the chain number that you want to dial using that chain dial number. (up to 32 digits)
6. Make sure that the registered information is correct and then click on the OK button.
7. Transmit the edited data to the fax machine. Refer to steps 9 and 10 under “5-1 Registering Self-Station Information” on
page 5-2 to transmit the edited data to the fax machine.
1
2
3
To Next Page
Loading...
