9-4
Troubleshooting
Gray background. Check the toner cartridge. If necessary, replace the toner
cartridge.
8-1
Check the Print density setting in
KYOCERA Client Tool.
Decrease the adjustment value for
Print density in KYOCERA Client
Tool.
3-53
Dirt on the top edge or
back of the paper.
Is the interior of the machine dirty? If the problem is not solved even after
printing several pages, clean the
rollers, conveying unit and paper feed
unit.
If the problem is not solved after
cleaning, call for service.
8-8
Copies have a moire
pattern (dots grouped
together in patterns and
not aligned uniformly).
Is the original a printed photograph? Set the image quality to Photo.3-45
Texts are not clearly
printed.
Did you choose appropriate image
quality for the original?
Select appropriate image quality. 3-45
The previous image
remains and lightly
printed. In minor cases,
residual image appears
as black dots.
— Select Configuration > Device
Defaults > Media type and set it to
Custom7. If there is still no
improvement, Decrease the
adjustment value for Print density in
KYOCERA Client Tool.
If there is still no improvement, return
the setting to the original value.
3-53
The altitude is 1,500 m
or higher and irregular
white dots appear in the
image.
— Select Maintenance Menu > Adjust
print quality > Altitude setting and
increase the adjustment value. If there
is no improvement after the value is
increased by 1 level, increase by 1
level again. If there is still no
improvement, return the setting to the
original value.
8-15
Symptom Checkpoints Corrective Actions
Reference
Page
To Next Page
Loading...
