Kyocera TASKalfa 1800 - Checking the Remaining Amount of Toner and Paper

6-10
Checking the Status > Checking the Remaining Amount of Toner and Paper
Checking the Remaining Amount of Toner
and Paper
Check the remaining amount of toner and paper on the message display.
1
Display the screen.
1 Press the [Status/System Menu/Counter] key.
2 Press the [▲] or [▼] key to select [Status], and press the [OK] key.
2
Check the status.
Press the [▲] or [▼] key to select [Toner Status] or [Paper Status], and press the [OK] key
Toner Status
You can check the remaining amount of toner level from 100 to 0% (10% increments).
Paper Status
Press the [▲] or [▼] key to select a paper source from [Cassette 1 (to 4)] or [MP Tray]. Then,
press the [OK] key to show the status of the selected source.
NOTE
• If the paper size is unclear, [-----] appears.
• [Cassette 2 (to 4)] are displayed when the optional paper feeder is installed.
Status/Sys. Menu
Status
21
Status
Toner Status
21
Cassette 1
A4
Empty
The paper size and media type specified for the
selected source are displayed. (Press the [▲] or
[▼] key to switch the screens.)
If paper has run out or the cassette is not installed,
[Empty] is displayed.