Kyocera TASKalfa 181 - Page 34

2KJ/2KH-1
1-2-14
8. Fit two wire saddles and the edging to
machine.
Figure 1-2-18
9. Pass the key counter wire through two wire
saddles and the edging.
Figure 1-2-19
Wire saddle RLWC-1SV
(7YZM610001++H01)
Wire saddle RLWT-0.5V
(7YZM610009++H01)
Edging
(7YZM210003++H01)
Edging
Wire saddle
Wire saddle
Key counter wire
Edging