Copying Functions
4-56 OPERATION GUIDE
3 Place the originals and press the Start key.
Copying is performed according to the registered
program.
Editing and Deleting Programs
You can change program number and program name, or delete program.
Use the procedure below to edit or delete a program.
1 Press the Program key.
2 Press [Edit] and press the key(s) corresponding to
the program number (01 to 50) to change or delete.
3 To edit a program, use the procedure for registering
a program and press [Change]. Then change the
program number and program name and press
[Register]. Choose [Yes] in the confirmation screen
to change the program.
To delete the program, press [Delete this Program].
Choose [Yes] in the confirmation screen to finally
delete the program.
To Next Page
Loading...
