Preparation before Use
2-8 OPERATION GUIDE
Setting Date and Time
Follow the steps below to set the local date and time at the place of installation.
When you send an E-mail using the transmission function, the date and time as set here will be printed in the
header of the E-mail message. Set the date, time and time difference from GMT of the region where the machine
is used.
NOTE: Be sure to set the time difference before setting the date and time.
1 Turn on the main power switch.
2 Press the System Menu key.
3 Press [ ], [Date/Timer] and then [Change] of
Time Zone.
4 Select the region.
NOTE: Press [ ] or [ ] to view the next region.
5 Press [Off] or [On] of Summer Time and press [OK].
NOTE: If you select a region that does not utilize
summer time, the summer time setting screen will not
appear.
6 Press [Change] of Date/Time.
Date/Timer - Time Zone
Set time zone.
Select the location nearest you.
Time Zone
-12:00 International Date Line West
1/13
-11:00 Midway Island, Samoa
-10:00 Hawaii
-09:00 Alaska
-08:00 Pacific Time (US & Canada)
-07:00 Arizona
Summer Time
Off
On
Status 10/10/2008 10:10
Cancel
OK
To Next Page
Loading...
