Why Kyocera TASKalfa 250ci cannot perform broadcast transmission?
The device may not be able to perform broadcast transmission because there is not enough free space available in the memory. To solve this, free up some space or send after the memory has free space.
Why Kyocera TASKalfa 250ci All in One Printer cannot receive document?
There are several reasons the device might not be able to receive documents: * Make sure the modular cord is correctly connected. * If a communication error is displayed, resolve the error and ask the sender to retry. * If RX (reception) restriction is activated, cancel the RX restriction.
What to do if Kyocera TASKalfa 250ci gives Job Accounting restriction exceeded?
The number of pages used has exceeded the limit set by Job Accounting, and no further operation is possible. Press [End] to cancel the job. Try the job again after resetting the limit for paper use.
What to do if Kyocera TASKalfa 250ci All in One Printer cannot send document?
There could be several reasons why the document cannot be sent: * Ensure the modular cord is correctly connected. * If a communication error is displayed, fix the cause of the error and try sending again. * Check if TX (transmission) restriction is activated, and if so, cancel the TX restriction.
What to do if Kyocera All in One Printer says FAX box limit exceeded?
The FAX Box capacity is full with document data. Press [End] to cancel the job. Try the job again after printing or deleting data in the FAX Box.
What to do if my Kyocera TASKalfa 250ci All in One Printer displays machine failure?
First, turn the main power switch off and then on again, or unplug the power cord and plug it back in. If the error message persists, make a note of the error code, then turn off the main power switch, unplug the power cord, and call your service representative.
What to do when there is a paper jam in Kyocera All in One Printer?
If a paper jam occurs in your Kyocera All in One Printer, the machine will stop and the location of the jam will be indicated on the touch panel. Leave the machine on and follow the instruction to remove the jammed paper.
How to fix Kyocera TASKalfa 250ci machine failure?
If your Kyocera All in One Printer is showing a machine failure message, try turning the main power switch off and on, or unplug the power cord and plug it in again. If the message persists, make a note of the error code, turn the main power switch off, unplug the power cord, and call your service representative.
Why is my Kyocera All in One Printer not recognizing USB memory?
If your Kyocera All in One Printer does not recognize the USB memory, ensure the USB memory is securely plugged into the machine. If the USB host is blocked, select Unblock in the USB host settings.
How to resolve improperly printed documents on Kyocera All in One Printer?
If your Kyocera All in One Printer is printing documents improperly, check that the printer driver and application software settings are set properly on your PC.
General| Functions | Print, Copy, Scan, Fax |
|---|---|
| Copy Resolution | 600 x 600 dpi |
| Duplex Printing | Standard |
| Type | Color Multifunctional |
| Print Speed | 25 ppm |
| Print Resolution | 600 x 600 dpi, Multi-bit technology for print quality of 9, 600 x 600 dpi equivalent |
| Copy Speed | 25 copies per minute (A4) |
| Scan Resolution | 600 dpi |
| Fax Resolution | 200 x 200 dpi, 300 x 300 dpi |
| Memory | 1 GB |
| Hard Disk Drive | 80 GB |
| Network Connectivity | Ethernet, USB |
| Scan Features | Scan to e-mail, Scan to FTP, Scan to SMB, Scan to USB Host, TWAIN scan |
Explanation of symbols used for safety warnings and prohibited/required actions.
Instructions for loading paper into the cassettes and multi-purpose tray.
Procedures for placing originals on the platen or in the document processor.
Steps for turning the machine's main power on and off.
Instructions for logging in and out of the machine when user login administration is enabled.
Step-by-step guide for performing basic copying operations.
Overview of sending scanned images via E-mail, PC, or Document Box.
Explains the functions and basic operations of the Document Box feature.
Procedure to specify the size of originals for scanning.
How to select the paper source for copying.
Enabling additional copies after a job is completed, with optional password protection.
Selecting the original size for scanning.
Selecting the size of the image to be sent.
Selecting the file format for sending scanned images.
Restricting access to PDF files by assigning passwords for display, print, or edit.
Creating, editing, and managing custom boxes for storing documents.
Information on Private Print, Stored Job, Quick Copy, and Proof and Hold Job Boxes.
Checking the status of jobs being processed or waiting to be printed.
Reviewing the history of completed jobs.
Pausing and resuming all printing jobs in printing/waiting status.
Suspending current job to prioritize a waiting job.
Checking toner, paper, and staple levels on the touch panel.
Configuring or checking the status of installed devices and lines.
Configuration of common settings like language, sound, and units.
Settings related to copying functions such as paper selection and zoom.
Adjusting print quality and performing machine maintenance procedures.
Resetting the machine's hard disk to its default mode.
Configuring network settings including host name and TCP/IP protocols.
Procedures for cleaning the machine's exterior and internal components.
Instructions for replacing toner containers and the waste toner box.
General guidelines for diagnosing and solving common machine problems.
How to respond to various alphanumeric error messages displayed on the touch panel.
Step-by-step instructions for clearing paper jams from different locations.
Specifies how user access is administered, including authentication methods.
Manages copy/print counts by assigning IDs to accounts.
Detailed technical specifications of the machine and its components.
To Next Page
