2MV
1-3-101
U332 Setting the size conversion factor
Description
Sets the coefficient of nonstandard sizes in relation to the A4/Letter size. The coefficient set here
is used to convert the black ratio in relation to the A4/Letter size and to display the result in user
simulation.
Purpose
To set the coefficient for converting the black ratio for nonstandard sizes in relation to the A4/Let-
ter size.
Method
1. Press the start key.
2. Select the item to set.
Setting: [Rate]
1. Change the setting using the +/-keys or numeric keys.
2. Press the start key. The value is set.
Setting: [Mode]
1. Select the mode.
Initial setting: 0
2. Press the start key. The setting is set.
Setting: [Level 1/2]
1. Select the item.
2. Change the setting using the +/-keys or numeric keys.
3. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Item No. Description
Display Description
Rate Size coefficient
Mode Toggling full-color count and color coverage count display
Level 1 Low coverage threshold value
Level 2 Middle coverage threshold value
Display Description
Setting
range
Initial
setting
Rate Size coefficient 0.1 to 3.0 1.0
Display Description
0 Full-color count display
1 Color coverage count display
Display Description
Setting
range
Initial
setting
Level 1 Low coverage threshold value 0.1 to 99.8 1.0
Level 2 Middle coverage threshold value 0.1 to 99.9 2.5
To Next Page
Loading...
