2MV
1-4-4
0514 Multiple sheets in cassette 4 PF feed sensor (PFFS) does not turn off during
paper feed from cassette 4.
G
0518 Multiple sheets in duplex
section
The registration sensor (RS) does not turn off dur-
ing paper feed from the duplex section.
F
0519 Multiple sheets in MP tray The registration sensor (RS) does not turn off dur-
ing paper feed from theMP tray.
F
1403 Feed sensor 1 non arrival
jam
Feed sensor 1 (FS1) does not turn on during paper
feed from cassette 3.
G
1404 Feed sensor 1 (FS1) does not turn on during paper
feed from cassette 4.
G
1413 Feed sensor 1 stay jam Feed sensor 1 (FS1) does not turn off during paper
feed from cassette 3.
F
1414 Feed sensor 1 (FS1) does not turn off during paper
feed from cassette 4.
F
1604 Feed sensor 2 non arrival
jam
Feed sensor 2 (FS2) does not turn on during paper
feed from cassette 4.
H
1614 Feed sensor 2 stay jam Feed sensor 2 (FS2) does not turn off during paper
feed from cassette 4.
G
4002 Registration sensor non
arrival jam
The registration sensor (RS) does not turn on dur-
ing paper feed from cassette 2.
G
4003 The registration sensor (RS) does not turn on dur-
ing paper feed from cassette 3.
G
4004 The registration sensor (RS) does not turn on dur-
ing paper feed from cassette 4.
G
4012 Registration sensor stay jam The registration sensor (RS) does not turn off dur-
ing paper feed from cassette 2.
F
4013 The registration sensor (RS) does not turn off dur-
ing paper feed from cassette 3.
F
4014 The registration sensor (RS) does not turn off dur-
ing paper feed from cassette 4.
F
4101 Fuser pre sensor non arrival
jam
The fuser pre sensor (FUPS) does not turn on dur-
ing paper feed from cassette 1.
F
4102 The fuser pre sensor (FUPS) does not turn on dur-
ing paper feed from cassette 2.
F
4103 The fuser pre sensor (FUPS) does not turn on dur-
ing paper feed from cassette 3.
F
4104 The fuser pre sensor (FUPS) does not turn on dur-
ing paper feed from cassette 4.
F
4108 The fuser pre sensor (FUPS) does not turn on dur-
ing paper feed from duplex section.
F
4109 The fuser pre sensor (FUPS) does not turn on dur-
ing paper feed from MP tray.
F
Code Contents Conditions
Jam
location*
*: Refer to figure 1-4-1 for paper jam location (see page 1-4-1).
To Next Page
Loading...
