Kyocera TASKalfa 2550ci - Page 261

2MV
1-4-5
4111 Fuser pre sensor stay jam The fuser pre sensor (FUPS) does not turn off dur-
ing paper feed from cassette 1.
F
4112 The fuser pre sensor (FUPS) does not turn off dur-
ing paper feed from cassette 2.
F
4113 The fuser pre sensor (FUPS) does not turn off dur-
ing paper feed from cassette 3.
F
4114 The fuser pre sensor (FUPS) does not turn off dur-
ing paper feed from cassette 4.
F
4118 The fuser pre sensor (FUPS) does not turn off dur-
ing paper feed from the duplex section.
F
4119 The fuser pre sensor (FUPS) does not turn off dur-
ing paper feed from the MP tray.
F
4201 Eject sensor non arrival jam The eject sensor (ES) does not turn on during
paper feed from cassette 1.
F
4202 The eject sensor (ES) does not turn on during
paper feed from cassette 2.
F
4203 The eject sensor (ES) does not turn on during
paper feed from cassette 3.
F
4204 The eject sensor (ES) does not turn on during
paper feed from cassette 4.
F
4208 The eject sensor (ES) does not turn on during
paper feed from duplex section.
F
4209 The eject sensor (ES) does not turn on during
paper feed from MP tray.
F
4211 Eject sensor stay jam The eject sensor (ES) does not turn off during
paper feed from cassette 1.
I
4212 The eject sensor (ES) does not turn off during
paper feed from cassette 2.
I
4213 The eject sensor (ES) does not turn off during
paper feed from cassette 3.
I
4214 The eject sensor (ES) does not turn off during
paper feed from cassette 4.
I
4218 The eject sensor (ES) does not turn off during
paper feed from the duplex section.
I
4219 The eject sensor (ES) does not turn off during
paper feed from the MP tray.
I
Code Contents Conditions
Jam
location*
*: Refer to figure 1-4-1 for paper jam location (see page 1-4-1).