2MV
1-5-13
(5) Detaching and refitting the MP tray
Procedures
1. Open the right cover 1.
2. Remove the MPF wire cover and then
remove the connector.
3. Close the right cover 1.
Figure 1-5-20
4. Open the MP tray.
5. Release two fulcrums of the MP tray by
using a flat screwdriver.
6. Pull two straps upwards to remove.
7. Remove the MP tray.
Figure 1-5-21
Right cover 1
Connector
MPF wire cover
Flat screwdriver
Flat screwdriver
Fulcrum
MP tray
Straps
Fulcrum
To Next Page
Loading...
