2MV
1-2-42
3. Insert the gigabit ethernet board along
the groove in OPT2 and secure the
board with two pins that have been
removed in step 2.
Caution: Do not directly touch the giga-
bit ethernet board terminal.
Hold the top and bottom of the gigabit
ethernet board, or the projection of the
board to insert the gigabit ethernet
board.
Figure 1-2-58
4. Plug the modular connector cable into
the line terminal,
Figure 1-2-59
Pin
Groove
Pin
Gigabit ethernet
board
Modular
connector cable
To Next Page
Loading...
