Default Setting (System Menu)
9-13
9
Error Handling
Select whether to cancel or continue the job when an error has occurred. The possible errors and what to do for
the errors are as follows.
Duplexing Error
Select what to do when duplex printing is not possible for the selected paper sizes and media types.
Finishing Error
Select alternative actions when finishing (stapling or offsetting) is not available for the selected paper size or
media type.
No Staple Error
Select what to do when staples run out during printing.
Finished Pages Exceeded
Select what to do when finishing (stapling or offsetting) capacity is exceeded during printing.
Item Description
1-sided Printed in 1-sided
Display Error Message to cancel printing is displayed.
Item Description
Ignore The setting is ignored and the job is printed.
Display Error Message to cancel printing is displayed.
Item Description
Ignore Printing continues without stapling.
Display Error Message to cancel printing is displayed.
NOTE: This setting is displayed when an optional document finisher is installed.
Item Description
Ignore Printing continues without finishing.
Display Error Message to cancel printing is displayed
NOTE: This setting is displayed when an optional document finisher is installed.
To Next Page
Loading...
