Kyocera TASKalfa 305 - Drum Section; Detaching and Refitting the Drum Unit; Detaching and Refitting the Chager Roller Unit

2K3/2L3
1-5-19
1-5-5 Drum section
(1) Detaching and refitting the drum unit
Procedure
1. Open the front cover. (See page 1-5-3)
2. Release the waste toner box.
(See page 1-5-16)
3. Release the lock lever and then open
the developing cover.
(See page 1-5-17)
4. Open the right cover 1.
(See page1-5-11 )
5. Release the lock lever (yellow) and then
remove the drum unit.
6. Check or replace the drum unit and refit
all the removed parts.
Figure 1-5-31
(2) Detaching and refitting the chager roller unit
Procedure
1. Remove the drum unit.
(See page 1-5-19)
2. Release the lock lever and then remove
the chager roller unit.
3. Check or replace the chager roller unit
and refit all the removed parts.
Figure 1-5-32
f
Lock lever(yellow)
Drum unit
Drum unit
Chager roller unit
Lock lever