2LK/2LN/2LM/2LC-2
1-5-33
12. Open the front cover and then pull out the waste toner box tray (see page 1-5-34).
13. Rotate the adjustment knob using a 5 mm hex wrench.
Direction of rotation
(V-1 - V-5) >= 2 scales (sample 1): rotate counterclockwise.
(V-1 - V-5) <= -2 scales (sample 2): rotate clockwise.
Number of rotation
(V-1- V-5) x 4 clicks
14. Refit the waste toner box tray as before and then close the front cover.
15. Turn the main power switch off and on. Correction automatically starts.
16. Print a reference chart and verify the result.
Figure 1-5-56
Allen wrench
Hexagon socket
Hexagon socket
Hexagon socket Hexagon socket
To Next Page
Loading...
