2LK/2LN/2LM/2LC
1-5-51
8. Remove five screws.
9. Unhook two hooks and then remove the
controller box.
Figure 1-5-80
10. Remove the following connectors that
connected to the main PWB.
YC23
YC27
YC32
YC8 (FFC connector with a lock)
YC9
YC1 [BLACK] (with a lock)
YC2 [BLUE] (with a lock)
*: When removing the FFC from the FFC
connector with a lock, remove the FFC
after released by lifting up the lock lever
(see page 1-5-50)
Figure 1-5-81
Controller box
Screws
Hook
Hook
Screws
Screw
YC23
YC27
YC32
YC8
YC9
YC2
YC1
BLACK
BLUE
Controller box
Main PWB
Main PWB
FFC connector with a lock
To Next Page
Loading...
