Kyocera TASKalfa 3050ci - Removable memory is full; Send error; Staple is empty; Staple is empty. (Manual Staple)

2LK/2LN/2LM/2LC
1-5-65
(7) Detaching and refitting the fuser IH PWB
Procedure
1. Remove seven screws and then
remove the rear upper cover.
Figure 1-5-104
2. Remove eight screws.
3. Release two hanging parts and then
remove the rear lower cover.
4. Remove the fuser unit (see page 1-5-
45).
Figure 1-5-105
Rear upper cover
Screws
Screws
Screw
Screws
Rear lower cover
Screw
Screw
Screws
Screws