2LK/2LN/2LM/2LC
2-1-5
(3) Paper conveying section
The paper conveying section conveys paper to the transfer/separation section as paper feeding from the cas-
sette or MP tray, or as paper refeeding for duplex printing. Paper by feeding is conveyed by the middle roller to
the position where the registration sensor (RS) is turned on, and then sent to the transfer/separation section
by the right registration roller and left registration roller.
Figure 2-1-5 Paper conveying section
3
4
5
8
7
6
2
9
1
1. Middle roller
2. Middle pulley
3. Left registration roller
4. Right registration roller
5. Paper conveying pulley
6. Middle sensor (MS)
7. Regist deflection sensor (RDS)
8. Actuator
(regist deflection sensor)
9. Registration sensor (RS)
To Next Page
Loading...
