Kyocera TASKalfa 3050ci - 1-2-6 Installing the coin vender (option for japan only)

2LK/2LN/2LM/2LC-2
1-2-59
1-2-6 Installing the coin vender (option for japan only)
Coin vender installation requires the following parts:
Procedure
1. Press the power key on the operation
panel to off. Make sure that the power
indicator and the memory indicator are
off before turning off the main power
switch. And then unplug the power
cable from the wall outlet.
2. Fit the vender base to coin vender
using four M4 x 6 screws.
Figure 1-2-77
Parts Quantity Part.No.
Coin vender
1 1905H99JP0 (option)
Vender wire 1
Supplied with
coin vender
Ferrite core 1
Clamp 1
Vender signal cable 1 302K946AE0
Coin vender
M4 x 6 screws
M4 x 6 screws
Vender base