Kyocera TASKalfa 307ci - Page 298

8-31
Setup and Registration (System Menu) > System Menu
Item Description
Protocol Detail ―
NetBEUI Selects whether or not to receive documents using NetBEUI.
*1
Value: Off, On
*1 The setting will be changed after restarting the device or the network for the machine.
LPD Select whether or not to receive documents using LPD.
*1
Value: Off, On
SMTP (E-mail TX) Select whether or not to send e-mail using SMTP.
Value: Off, On
POP3 (E-mail RX) Select whether or not to receive e-mail using POP3.
Value: Off, On
FTP Client
(Transmission)
Select whether or not to send documents using FTP. To use the FTP Client, set the protocol to
[On]. The default port number is 21.
Value: Off, On
FTP Server (Reception) Select whether or not to receive documents using FTP.
*1
Value: Off, On
SMB Client
(Transmission)
Select whether or not to send documents using SMB. To use the SMB Client, set the protocol to
[On]. The default port number is 445.
Value: Off, On
LDAP Select whether or not to use LDAP.
Value: Off, On
SNMP Select whether or not to communicate using SNMP.
*1
Value: Off, On
SNMPv3 Select whether or not to communicate using SNMPv3.
*1
Value: Off, On
HTTP Select whether or not to communicate using HTTP.
*1
Value: Off, On
HTTPS Select whether or not to communicate using HTTPS.
*1 *2
Value: Off, On
*2 Set "SSL" to [On] in "Secure Protocol".
Secure Protocol (page 8-33)
IPP Select whether or not to receive documents using IPP. To use the IPP protocol, set [IPP] to
[On], and set [SSL] to [Off]. In addition, select [Not Secure (IPP&IPPS)] on IPP Security under
Security Settings from the Command Center RX. The default port number is 631.
*1 *2
Value: Off, On
IPP over SSL Select whether or not to use IPP over SSL. To use the IPP protocol, set [IPP] and [SSL] to [On].
The default port number is 443.
*1 *2
Value: Off, On
NOTE
When selecting [On], it also requires a certificate for SSL. The default certificate is the self-
certificate of the machine.
Command Center RX User Guide
RAW Port Select whether or not to receive documents using RAW Port.
*1
Value: Off, On