8-36
Setup and Registration (System Menu) > System Menu
Basic
Custom Setup The detailed settings for wireless LAN can be changed.
Network Name (SSID) Set the SSID (Service Set Identifier) of the wireless LAN to which the machine connects.
Up to 32 characters can be entered.
Connection Mode Set the connection mode.
Value: Ad Hoc, Infrastructure
Ad Hoc: Directly communicates with the device without going through an access point. This
method cannot be used to connect to two or more devices.
Infrastructure: Performs communication through an access point.
Channel Set channel. Use [-] / [+] or the numeric keys to enter a number.
Value: 1 to 11
Network Authentication Select network authentication type. To select other options, open the device home page from a
computer.
Value: Open, Shared, WPA-PSK
*1
, WPA2-PSK
*1
Encryption Select encryption method. If the option other than [Disable] is selected, enter the WEP key or
the Preshared key. The setting values vary depending on the Network Authentication setting.
Select [Data Encryption].
When Network Authentication is set to [Open] or [Shared]
Value: Disable, WEP
When Network Authentication is set to [WPA-PSK] or [WPA2-PSK]
Value: TKIP
*2
, AES, Auto
*2
, Preshared Key
If [WEP] is selected, enter the WEP key. Up to 26 characters can be entered.
If [
TKIP
], [
AES
] or [
Auto
] is selected, enter the Preshared key. Enter the value in 8 to 64 characters.
*1 Not displayed if you selected [Ad Hoc] for "Connection Mode".
*2 Not displayed if you selected [WPA2-PSK] for "Network Authentication".
Item Description
Host Name
Check the host name of the machine. Host name can be changed from Command Center RX.
Changing Device Information (page 2-51)
TCP/IP Setting For details on setting value.
TCP/IP Settings (page 8-29)
IPSec (page 8-33)
LAN Interface Select the LAN Interface type.
*1
Value: Auto, 10Base-Half, 10Base-Full, 100Base-Half, 100Base-Full, 1000BASE-T
This function is displayed when the optional network interface kit is installed.
*1 The setting will be changed after restarting the device or network.
MAC Address Filter Select whether to use MAC Address Filter.
Operation Guide for the optional network interface kit
Value: Off, On
Restart Network Restarts the network card of the device.
Item Description
To Next Page
Loading...
